Login
DIY Car Part Fitment – Tools & Guide
21 Jun,2025
Install your own car bumper, headlight, or mirror with this simple DIY tool checklist and fitment process.
🛠️ DIY Fitment of Bumper, Headlight, and Mirror – Tools You Need
Installing used or replacement car parts like a bumper, headlight, or mirror is absolutely possible at home if you have basic tools and some patience.
This guide walks you through:
-
✅ Essential tools
-
✅ Safety precautions
-
✅ Simple fitment steps
-
✅ Tips to avoid damage
🔧 Tools You’ll Need (Basic Kit)
| Tool | Use |
|---|---|
| ✅ Screwdrivers (Flat & Star) | To remove/attach screws and clips |
| ✅ Ratchet & Socket Set | For bolts on bumpers, headlight mounts |
| ✅ Trim Remover Tool Set | Safely removes plastic clips/panels without scratches |
| ✅ Panel Pry Bar / Plastic Spudger | Useful for lifting fragile panels |
| ✅ Electrical Tape | For wiring insulation (mirror/headlight connectors) |
| ✅ Zip Ties or Fasteners | Secures loose wires or sensors |
| ✅ Work Gloves | Protects your hands from sharp edges |
| ✅ Flashlight/Headlamp | Helps during tight-angle work or night DIYs |
🚗 Part-Wise Fitment Tips
🟠 1. Front Bumper Installation
Steps:
-
Open the bonnet and unscrew top bumper bolts
-
Jack up the car (if needed) and unscrew bottom bolts/clips
-
Gently pull bumper out from sides – use trim tool to release clips
-
Align new/used bumper and re-bolt in reverse order
-
Reconnect fog lights or sensors (if applicable)
Time: 30–60 mins
Skill: Moderate
Tip: Don’t overtighten bolts near plastic edges.
🟢 2. Headlight Fitment
Steps:
-
Remove bumper or side trim if headlight is partially covered
-
Unscrew all mounting bolts
-
Disconnect the wiring harness from the old light
-
Plug in the new/used headlight (check all bulbs work)
-
Align beam level if needed, and re-bolt
Time: 20–40 mins
Skill: Easy
Tip: Use gloves – avoid touching the bulb glass.
🔵 3. Side Mirror Fitment
Steps:
-
Remove interior door panel (only top if possible)
-
Unbolt the 2–3 mirror mounting screws
-
Disconnect the power wire (if electric mirror)
-
Fit the new mirror, reattach wires
-
Screw in bolts, reattach door trim
Time: 15–25 mins
Skill: Easy
Tip: Test adjustment and indicator before closing trim.
⚠️ Safety & Fitment Tips
-
Always disconnect car battery before removing electrical parts
-
Use padding under the car or on body edges to avoid scratches
-
Label wires/connectors with tape if you’re unsure
-
Take photos during disassembly to remember screw locations
🛒 Buying Used Parts?
Shop verified bumpers, headlights, and mirrors at
✅ nayapuranaonline.com/shop
Available for Tata, Hyundai, and more!
🧠 Final Words
You don’t always need a garage to replace small car parts.
With the right tools, a little care, and a reliable spare part, you can easily save time and money by doing it yourself.
